Lithium iron phosphate battery assembly

　　1. Battery material handling

　　Some materials used in secondary batteries, such as lithium ion, require special treatment. The electrode should be processed at a high speed without damaging the fragile active material. In the electrolyte, special care must be taken to prevent the formation of precipitation and corrosive gases.

　　2. CAM unit

　　If the machine is composed of a cylinder or AC servo drive with a cycle time of less than 1 second, it is difficult to maintain synchronization or stability for a long time even if the new machine is in good condition when it is installed. The cylinder reaches the end of the running distance in a short time, and the maintenance period is short. In mechanically manufactured cam mechanisms, this problem can be solved because all drives are held by the smallest motor.

　　3. Installation and foundation

　　It is important to establish a solid mechanical device and foundation for long-term stability. Installation and installation can reduce start-up time by minimizing the deviation of transmission and transmission mechanism accuracy. In general, the use of aluminum frames is eliminated. Use the solid foundation of thick square wood and the manufacturing process of the pot to establish a stable foundation. Regarding a variety of different requirements, annealing can be carried out, and additional precision installation valve seats can be used.

　　4. Vacuum treatment

　　There are not only simple vacuum chambers and heating furnaces, but also the operation process of the vacuum chamber and the mechanism of liquid application equipment. Familiar with special vacuum equipment and components, such as vacuum pumps, pipes and valves.

　　5. Accurate positioning

　　Must have the required positioning technology and relevant experience, according to the requirements of mechanical positioning and image processing, to achieve an efficient processing calibration system. In order to maintain the accuracy for a long time, the control of the camera or the positioning station is realized, and the precise positioning is realized, including the installation design.

　　6. Laser welding

　　If possible, according to personal needs, such as CO2, YAG, LED, optical fiber and other laser knowledge and achievements, such as battery foil laser welding, throttle valve shell and bonnet welding, etc.